Monday, March 10, 2014

How To Do Screen Iphone Repair Auckland Offers

By Leticia Jensen


Maintenance of smart phones in the modern world is tough considering that most of them have no keypads hence use only sensitive touch screens for their functioning. Smart phones may breakdown due to some factors for example poor handling. Most parts are delicate hence the need for maximum care when carrying out the iphone repair auckland offers.

Start by taking time to back up data in your smart phone. This will avoid the unnecessary loss of vital data to the user. Use a computer whole doing this, by browsing through the apps till you find the iTunes app. Click on the Sync command.

Get all tools necessary for the maintenance program. A complete maintenance kit is vital, as one will get all tools, of the required sizes and use. Inspect the kit to make sure that items like screw drivers, dryers, tweezers and necessary replacement parts are there. Tools ought to be of good quality, since most smart phone parts are small and delicate hence need for maximum care.

Most smart phones have tiny screws on the bottom side near the USB connector. Using a screw driver, unscrew both screws and carefully place them on a soft cloth. Look for flaps in the top right corner. The flaps are used in handling of the screen. Carefully lift it using a wedging tool. Take care since most smart phones have two flaps.

The second flap is held using a sticker. Lift a black clamp near the screen so as to detach the third connection. After lifting the third clamp, make sure that you carefully detach the screen from the rest of the smart phone shell. Use a little force to pull out the screen if need arises.

The rest of the six screws are where most smart phones are detached. They are located strategically on these sides, flaps and the top right. A black tape covers most screws from direct exposure hence there is a need for a sharp razor to be used when detaching it from the rest of the shell. The LCD glass needs to be slid to the south, where the Home button is. Use some little pressure so as to detach it from the metal piece.

Make sure the LCD screen is totally free. Take time whole cleaning the broken glass and utmost care must be taken since the same plastic frame will be re used. If need be, use a dryer to clear off the glass as so long as the heat is controlled to avoid deforming the plastic part. Rub some surgical spirit on the parts to dissolve some adhesive parts that fail to detach easily.

Get the new screen. Apply the super glue carefully and not close to the Home button and the ear piece. Give the glue time to set for a while and afterwards attach the LCD screen back. Make sure the clamps slide in to shape and nicely. Attach the six screws, reinserting the cable into its black clamp. Connect all cables to their connectors and put the screen back to the phone making sure it fits nicely. Insert back the USB screws to place.




About the Author:



No comments:

Post a Comment