Once upon a time televisions were mostly made up of tubes encased in wood, wires, knobs, scanners, and rabbit ears. As with most things, televisions have become much more complicated and technical in today's world. Even though you may not have any plans to become a television repair person, you might still be interested in learning about the boards, such as the T-Con d50ud1, inside LCD tvs, if the science of electronics intrigues you.
When you open the back of an LCD television, you will most likely find the power supply module, or power supply board, located on the right side the back when you're looking at it. The power supply board is going to be the heaviest and biggest board on the back of your set. The function of the power supply board is to convert alternating current supply, or AC, which has the ability to change directions, to direct current voltage, DC.
Direct current moves in one direction only and is what the circuit inside the LCD television uses. In some televisions the power supply board and the inverter board are joined together. If the power supply board malfunctions you'll get no power or intermittent power.
The timing control board, or T-con, is the smallest board in the television. It is pretty much only found in LCD tvs. You'll probably find it under a shield toward the top of the back of the television.
The purpose of the T-con board is to control the circuit and TFT, or thin film transistor, driver. Indications that you have trouble with the T-con board will be vertical or horizontal lines. You might also see a double image, a white screen or no display.
You'll find the inverter board on one edge of the back panel. You won't find it at all unless you have an LCD tv. The purpose of the inverter board is to convert the low voltage DC that is supplied by the switched mode power supply. It turns the low voltage into high AC. This is what causes the backlights to light up. The inverter board and the power board are sometimes found together. You may have a problem with an inverter board when you see a dim screen, or when the display completely shuts down.
The main board is also known as the motherboard, the logic board, the main module, and the digital board. This is going to be the board on the back of the television that has the sound and video inputs and outputs attached to it. The main board is what takes in the signals and converts analog into digital. If you don't have color or sound, have vertical lines, or no picture, the main board may be the culprit.
Sometimes the audio receiving or jackpack board is separated from the mother board. The jackpack takes the sound signal to the processor and moves it to the amplifier. The amplifier drives the speakers located on both sides of the television. The jackpack may be your problem if you experience no sound, high pitched sound, or channels that randomly change.
When you open the back of an LCD television, you will most likely find the power supply module, or power supply board, located on the right side the back when you're looking at it. The power supply board is going to be the heaviest and biggest board on the back of your set. The function of the power supply board is to convert alternating current supply, or AC, which has the ability to change directions, to direct current voltage, DC.
Direct current moves in one direction only and is what the circuit inside the LCD television uses. In some televisions the power supply board and the inverter board are joined together. If the power supply board malfunctions you'll get no power or intermittent power.
The timing control board, or T-con, is the smallest board in the television. It is pretty much only found in LCD tvs. You'll probably find it under a shield toward the top of the back of the television.
The purpose of the T-con board is to control the circuit and TFT, or thin film transistor, driver. Indications that you have trouble with the T-con board will be vertical or horizontal lines. You might also see a double image, a white screen or no display.
You'll find the inverter board on one edge of the back panel. You won't find it at all unless you have an LCD tv. The purpose of the inverter board is to convert the low voltage DC that is supplied by the switched mode power supply. It turns the low voltage into high AC. This is what causes the backlights to light up. The inverter board and the power board are sometimes found together. You may have a problem with an inverter board when you see a dim screen, or when the display completely shuts down.
The main board is also known as the motherboard, the logic board, the main module, and the digital board. This is going to be the board on the back of the television that has the sound and video inputs and outputs attached to it. The main board is what takes in the signals and converts analog into digital. If you don't have color or sound, have vertical lines, or no picture, the main board may be the culprit.
Sometimes the audio receiving or jackpack board is separated from the mother board. The jackpack takes the sound signal to the processor and moves it to the amplifier. The amplifier drives the speakers located on both sides of the television. The jackpack may be your problem if you experience no sound, high pitched sound, or channels that randomly change.
About the Author:
See the featured products including the d50ud1 by referring to the Web. Spend a minute or two browsing the online store at http://www.tekbyus.com/product-tag/d50u-d1.
No comments:
Post a Comment